-
• Anchor windlasses for 3/4" (19 mm) to 4" (102 mm) chain • Capstans with 12" (305 mm) to 36" (914 MM) diameter barrels • Chain stoppers, pelican hooks, and line sheaves • Unit mounted or multiple deck configurations • Integrated gypsies and auxiliary drums • Custom configurations -
STANDARD FEATURES • Designed with 30° Wrap at 75% of the Height of the Pin • Heavy Duty Hydraulic Cylinders • Hydraulic Power Unit and Remote Control Panel • Marine Paint System • Every unit is functionally tested at the factory. OPTIONAL FEATURES • Equipment Customized to Suit the Operating Characteristics of any Vessel • Third Party Certification • Load Monitoring System • Load Tests • Local Controls • ABS, LRS and DNV approval available Shown in the pdf is a 200 MT tow pin. Please contact us for information on additional sizes and custom designed solutions -
Whether with a riding ladder style or column style gangway or a custom designed system, the engineers at Verhoef can design a solution that can accommodate all vessel styles with any dock restriction. -
Marine Structures manufactures a range of bollards ranging in capacity, size and style. Styles include:- Anvil
- T-Head
- Double Bitt
- Horn
- Kidney
-
Characteristics- Easy assembly & installation
- Good shear resistance
- Cost-effective; large footprint leads to a good load distribution over the frontal panel, which results in a lighter panel construction
- Very robust
- 40 years proven track record
- Container & Bulk Terminals
- Oil & Gas Terminals
- General Cargo Terminals
- Cruise Terminals
- Ferry & RoRo Terminals
- Navy
-
Standard Features • Designed for breaking strength of chain • Ideal for FPSO’s and shuttle tankers • Releasable at loads up to proof test value of chain • Hydraulic release mechanism • Weld down base • Special pawl provides for lower contact stress in chain • Smith Berger Quality Optional Features • Other sizes available • Bolt down base • Third party certification • Pneumatic release mechanism • Paint to your specification • Bellmouth chock for chain inlet • Load monitoring system Please download the brochure to learn about the various style of chain stoppers and please contact us for more information. -
Marine Structures manufactures the world's best marine cleats from 12 inch to 54 inches made from cast steel. -
The column has a turnable platform at a fixed height which can be reached by access stairs mounted to the side of the main structure. The telescopic gangway is mounted to the turnable platform and after positioning on the vessel’s deck will freely follow all movements within its design range without the need for an operator to be present. The column type is the most popular design for reaching ship deck levels from well below up to a maximum of about 18 meters/54 feet, vertical range. The gangway movements are powered by hydraulic cylinders, operated by a hydraulic control box mounted on the control platform. The column type can optionally be equipped with stores crane, lighting, alarms, fire monitor support(s) and/or cabin(s). Also other specific Client requirements can be integrated in the Gangway Column design. The largest benefit of the Column design is that it has a small foundation plate, requiring very little space on the jetty deck. Because of its proven and robust design, the Gangway Column has a long design life and low maintenance cost. -
Characteristics
- Exceptionally good energy absorption to reaction force ratio (e/R)
- Outstanding energy absorption per fender weight
- High shear stability
- No loss of performance up to 10° contact angle
- Sophisticated and optimized fender geometry
- Optional overload stopper
- Container & Bulk Terminals
- Oil & Gas Terminals
- General Cargo Terminals
- Cruise Terminals
- Ferry & RoRo Terminals
- Navy
-
Standard Features • Designed for breaking strength of wire with 90º wrap on sheave and +/- 90º rotation of swivelhead • Sealed grease lubricated tapered roller bearings • Hardened rope grooves for longer life • Smith Berger Quality Optional Features • Tail Sheaves / Tail Rollers • Bolt or Weld down mounting flange • Load monitoring system • Special sheaves for high performance synthetic ropes • Paint to your specification • Third party certification Shown in the pdf are sheaves sized for 2" rope. Please contact us for information on additional sizes and custom designed solutions -
Morse's domestic rubber molding capabilities allow them to make one of the few 100% US made fenders, compliant with the Buy American Act. Located in Keokuk, Iowa, Morse's manufacturing facility can produce certain molds and extrusions within a few weeks of order receipt. Dock fenders include: Arch fenders, Buckling Column fenders, Shear fenders and extruded fenders. -
• Fast Line Speeds • Emergency abort operating mode • Levelwind system • High braking capacities • Line monitoring system • Full range of control options • Hydraulic & electric drives • Proprietary split drum design available • Automatic render/recover mode
